欢迎光临驱控智造商城!
      驱控智造
cart
购物车0
全部产品分类
×
<在线客服<
Copley Controls:ACCELUS PANEL(ASP系列)
  • Copley Controls:ACCELUS PANEL(ASP系列)
0

Copley Controls:ACCELUS PANEL(ASP系列)

  • 价格
    ¥0
配送方式
总销量0
库存0
累计评论0
数量
- +

服务承诺:正品保证 极速退款 七天无理由退换

  • Product Details
  • Product Parameters
  • The Cumulative Comments0
  • Transaction Records0
  • Attachment Download
  • Copley Controls: Accelus Panel (ASP Series)

    20-180 VDC Digital Drives for Brushless/Brush Motors


    D
    escription

    Accelus is a 100% digital servo amplifier in a panel-mount package with a family of power options to 12A continuous and 36A peak. This new series offers sinusoidal commutation of brushless motors in torque, velocity, or position modes and fast, easy set up with CME 2™ software.

    CME 2™ software communicates with Accelus through an RS-232 link for complete amplifier setup. Auto-phasing and auto-tuning algorithms in CME 2™ slash set up times for fast system commissioning and eliminate “re-wire and try” so common in brushless motor installations. CME 2™ automates current loop tuning, as well as motor, Hall, and encoder phasing. A powerful oscilloscope and signal generator display amplifier performance for fine tuning thereafter. Amplifier control parameters are saved in nonvolatile flash memory. OEM’s can inventory one part, and configure amplifiers on-site to each axis in a machine.

    Advanced field-oriented-control ensures the highest motor torque over a wide speed range, minimizing motor heating and maximizing efficiency. Digital control algorithms transform stator currents into direct and quadrature components. The torque-producing quadrature current is controlled by the current loop, and the direct component is driven to zero eliminating losses from current that doesn’t produce torque. Space-vector modulation produces higher speeds than sine-pwm modulation from the same power supply.

    Accelus works with motion controllers that close position loops using incremental encoder feedback and process the position error in a PID filter to produce an amplifier command for torque, force, or velocity. Only one ±10V analog, or a one or two-wire digital PWM/DIR control signal is required. All commutation is done in the amplifier.

    In position-mode, Accelus accepts two-wire digital stepmotor control signals (CW/CCW, or Count/Direction), or operates as a slave from a master encoder. The ratio between input position pulses and motor position is programmable.

    Velocity control is derived from motor encoder signals. Velocity mode is useful not only for speed-setpoint applications, but enables operation with PLC’s or controllers that output position-error signals with no PID filtering.

    All amplifier circuits are DC coupled and operate from unregulated transformer-isolated DC power supplies, or regulated switching power supplies.

    The panel-mount package is compatible with the mounting footprint of Copley’s 5xx1 series trapezoidal brushless amplifiers, offering an easy upgrade to sinusoidal commutation with digital control.

    Control Modes

    • Gearing, Position, Velocity, Torque

    Command Interface

    • Stepper commands

    • ±10V velocity/torque command

    • PWM velocity/torque command

    • Master encoder [Gearing]

    Communications

    • RS232

    Feedback

    • Digital Quad A/B encoder

    • Digital Halls

    I/O - Digital

    • 6 inputs, 2 outputs

    Dimensions: mm [in]

    • 168 x 99 x 31 [6.6 x 3.9 x 1.2]


    Copley Controls: Accelus Panel (ASP Series)

    20-180 VDC Digital Drives for Brushless/Brush Motors


    D
    escription

    Accelus is a 100% digital servo amplifier in a panel-mount package with a family of power options to 12A continuous and 36A peak. This new series offers sinusoidal commutation of brushless motors in torque, velocity, or position modes and fast, easy set up with CME 2™ software.

    CME 2™ software communicates with Accelus through an RS-232 link for complete amplifier setup. Auto-phasing and auto-tuning algorithms in CME 2™ slash set up times for fast system commissioning and eliminate “re-wire and try” so common in brushless motor installations. CME 2™ automates current loop tuning, as well as motor, Hall, and encoder phasing. A powerful oscilloscope and signal generator display amplifier performance for fine tuning thereafter. Amplifier control parameters are saved in nonvolatile flash memory. OEM’s can inventory one part, and configure amplifiers on-site to each axis in a machine.

    Advanced field-oriented-control ensures the highest motor torque over a wide speed range, minimizing motor heating and maximizing efficiency. Digital control algorithms transform stator currents into direct and quadrature components. The torque-producing quadrature current is controlled by the current loop, and the direct component is driven to zero eliminating losses from current that doesn’t produce torque. Space-vector modulation produces higher speeds than sine-pwm modulation from the same power supply.

    Accelus works with motion controllers that close position loops using incremental encoder feedback and process the position error in a PID filter to produce an amplifier command for torque, force, or velocity. Only one ±10V analog, or a one or two-wire digital PWM/DIR control signal is required. All commutation is done in the amplifier.

    In position-mode, Accelus accepts two-wire digital stepmotor control signals (CW/CCW, or Count/Direction), or operates as a slave from a master encoder. The ratio between input position pulses and motor position is programmable.

    Velocity control is derived from motor encoder signals. Velocity mode is useful not only for speed-setpoint applications, but enables operation with PLC’s or controllers that output position-error signals with no PID filtering.

    All amplifier circuits are DC coupled and operate from unregulated transformer-isolated DC power supplies, or regulated switching power supplies.

    The panel-mount package is compatible with the mounting footprint of Copley’s 5xx1 series trapezoidal brushless amplifiers, offering an easy upgrade to sinusoidal commutation with digital control.

    Control Modes

    • Gearing, Position, Velocity, Torque

    Command Interface

    • Stepper commands

    • ±10V velocity/torque command

    • PWM velocity/torque command

    • Master encoder [Gearing]

    Communications

    • RS232

    Feedback

    • Digital Quad A/B encoder

    • Digital Halls

    I/O - Digital

    • 6 inputs, 2 outputs

    Dimensions: mm [in]

    • 168 x 99 x 31 [6.6 x 3.9 x 1.2]


  • No Parameters
  • The Cumulative Comments
  • Transaction Records
  • No Materia

Related Products

    The product category you choose has no product , please select other categories or add related products to the product center
×
驱控智造公众号qrcode_for_gh_aee60270b6a7_258